Enter your destination to get a totals estimate.
A06B-6140-H037 Fanuc iPS 37 Alpha Power Supply
Starting at $4,051.50 $4,051.50
Buy online your A06B-6140-H037 Fanuc iPS 37 Alpha Power Supply reference A06B-6140-H037 from our US e-store Cnc-shopping USA, specialist in CNC machine-tools spare parts.
This FANUC αiPS 37 power supply module feeds the DC link that drives FANUC SVMi servo amplifiers and αi spindle amplifiers in machine tools. It is a direct replacement unit for failed or unstable supplies in αi drive systems and is commonly sourced as a spare part for maintenance teams managing FANUC-equipped machining centers, lathes and grinders.
The A06B-6140-H037 sits on the incoming AC line and provides a stabilized DC bus for the αi servo and spindle amplifiers. As a Level‑Up generation module, it offers upper compatibility with earlier PS types while adding headroom for machines that see frequent acceleration bursts or simultaneous multi‑axis moves.
Output capability is sized at 37 kW rated with 84 kW maximum and 106 kW peak, delivering additional margin compared to prior versions. This extra capacity helps reduce nuisance DC bus alarms during heavy cuts or rapid traverses, particularly on equipment with larger axis motors or high‑inertia loads.
A built‑in power failure detection function is included on this Level‑Up type. In typical installations this feature supports simplified gravity‑axis drop prevention strategies during a mains loss event, an important safeguard on vertical axes and tooling columns.
Mechanically and electrically, the module follows the αi platform layout for a clean drop‑in replacement when swapping an existing iPS 37 / PSM‑37i. Match the rating and bus configuration already present in your drive cabinet and keep cable harnessing as originally routed for reliable service.
Reference: A06B-6140-H037
Manufacturer: FANUC
Product type: FANUC αiPS 37 power supply module for αi drive systems
Main function: Provides regulated DC bus power to SVMi servo and αi spindle amplifiers in FANUC CNC machines
Applications: Field replacement and retrofit in FANUC αi servo drive cabinets on machining centers, turning centers, grinders and production equipment using SVMi amplifiers
Key technical data: Level‑Up version with full upper compatibility to earlier PS types, rated output 37 kW, maximum 84 kW, peak 106 kW, increased capacity over previous PS generation, integrated power failure detection for gravity‑axis protection strategies, also referenced as iPS 37 or PSM‑37i, manufactured in Japan
In daily maintenance work this module is used to resolve DC bus faults, undervoltage or alarm conditions traced to the supply stage. Keeping a stocked spare on the shelf shortens machine downtime when a cabinet fault shuts down multiple axes. For planned outages it is often installed as a proactive swap on high‑hour systems to stabilize the drive DC link and extend machine uptime.
Each FANUC A06B-6140-H037 Power supply unit is tested on dedicated FANUC αi test benches by skilled engineers, verifying DC bus regulation, load response and protection signaling with SVMi amplifiers. Items are professionally packed for industrial shipping and supplied with a warranty. Many stocked items ship directly from our Florida facility, with fast dispatch depending on availability.
For urgent breakdowns this part can serve as an emergency spare to get a FANUC αi drive cabinet back online quickly. Cnc-shopping USA supports sourcing of obsolete parts and can assist with a repair service or exchange service when applicable, helping legacy installations remain productive.
Frequently asked questions about A06B-6140-H037:
What drive modules does this unit power?
It supplies the shared DC link for FANUC SVMi servo amplifiers and compatible αi spindle amplifiers within the αi drive platform. Verify your cabinet uses the αi family and the 37 kW rating before ordering.
Is it upper compatible with older PS models?
Yes, this Level‑Up type is designed for upper compatibility with earlier PS units of the same platform and rating. It also provides higher maximum and peak capacity for added headroom.
Does replacing this module require CNC parameter changes?
In typical cases no, since the power supply stage does not hold motion parameters (It just provides DC Link to the Fancu servo amplifiers). Standard practice is to install the same rating and confirm normal DC bus and alarm status after power up.
Can this be used in preventive maintenance plans?
Many maintenance teams keep one as a replacement unit in spare inventory and schedule a swap on high‑duty machines to minimize unplanned downtime. It is also suitable as a refurbished unit when coordinated through a qualified service.
| Availability | Shipment within 3 days |
|---|---|
| Weight | 10.00 kgs |
-
UPS Next Day AirFind out moreUPS Next day air service, Get it within 1 business day. (USA) -
DHL ExpressFind out moreDHL Worldwide Express - 24/48H delivery to 220 countries with tracking information and signature confirmation..
-
UPS GroundFind out moreStandard delivery by UPS Ground (3 to 5 days, depending of your location in the US). Delivered with a proof of Signature. (USA Only) -
DHL SelectFind out moreStandard delivery by DHL Select - 48H-72H depending of your country with tracking information. (EUROPE only)

