A660-2005-T506/L5R003 Fanuc Pulse coder cable servo i series 5m STRAIGHT

Starting at $188.70 $188.70

Product condition Availability Warranty
Price
New
Ships from: USA Warehouse
stock available Immediate shipment Estimate my delivery
12 months Warranty Replacement The product's warranty covers replacement with the same or a similar product for the entire contractual period.
$188.70 $188.70
Estimate Totals

Enter your destination to get a totals estimate.

  • Top-quality products backed by a warranty
  • Advanced technical support
  • Secure payment process with PDF invoice

Buy online your A660-2005-T506/L5R003 Fanuc Pulse coder cable servo i series 5m STRAIGHT reference A660-2005-T506/L5R003 from our US e-store Cnc-shopping USA, specialist in CNC machine-tools spare parts.

This FANUC pulse coder feedback cable is a dedicated servo i series encoder signal harness used to carry pulse coder feedback between the motor-mounted encoder and the servo amplifier/CNC side. On the production floor, a weak or intermittent feedback cable is a common cause of axis alarms, random servo trips, intermittent following error, and position issues that show up only under acceleration or vibration.

Built as a complete 5 meter cable assembly, this reference is typically selected when the original harness has been damaged by years of drag-chain flexing, tight routing, connector strain, or coolant contamination. Using the correct OEM reference helps maintenance teams avoid pinout errors and shielding problems that can happen with improvised encoder leads, especially on older machines where documentation is incomplete.

In typical FANUC axis packages, the pulse coder line is sensitive to poor contact quality and degraded shielding. Swapping in the correct harness is often one of the fastest, lowest-risk checks during troubleshooting because a marginal cable can mimic a failing pulse coder, servo motor, or amplifier and waste downtime chasing the wrong component.

This straight configuration is commonly used when the original cabinet-to-motor routing requires a clean run without forcing bends at the connectors. A correct-length harness also helps keep cabinet wiring serviceable by avoiding excessive coiling, which matters when you need quick access during future field replacement or rebuild work.

Reference:  A660-2005-T506/L5R003 (A660-2005-T506#L5R003)

Manufacturer: FANUC

Product type: FANUC Pulse coder signal cable

Main function: Pulse coder feedback cable for FANUC servo i series, transmitting encoder signals between the Servo motor pulse coder and the drive/CNC side for position and speed feedback.

Applications: Servo i series axis feedback wiring on CNC machine tools, troubleshooting intermittent encoder alarms, and harness replacement on machines with cable carrier wear.

Key technical data: Complete cable assembly for pulse coder feedback, 5 m length, straight connector orientation with a black encoder-side connector intended for FANUC A860 pulse coder connection, and a HIROSE grey connector on the servo amplifier side typically used on FANUC alpha i servo amplifier (A06B series). 

Maintenance teams usually replace this Fanuc signal cable after finding a cracked outer jacket, crushed sections inside a drag chain, Fanuc encoder alarm, coolant ingress, or a connector that no longer locks tightly. It is also a practical swap part during fault isolation because a borderline pulse coder lead can pass continuity checks but still drop feedback under motion, which directly impacts machine uptime.

For rebuild shops and OEM support teams keeping legacy FANUC servo i installations running, keeping the correct 5 m straight harness in spare inventory can reduce repair turnaround time. Matching the proper connector style and length helps avoid reworking wiring, which is where most signal integrity problems get introduced during emergency repairs.

Each unit can be checked on appropriate CNC test benches or simulators by skilled engineers to confirm continuity and basic signal integrity. Industrial packaging is used to protect connectors and the cable jacket during transport, and warranty terms apply according to the product condition and sales agreement. Depending on availability, many orders are commonly dispatched from our Florida warehouse.

This cable can also serve as an emergency spare for older FANUC servo i series machines where original harnesses are no longer easy to source. Cnc-shopping supports long-term maintenance by helping customers locate obsolete CNC spare parts, and repair or exchange options may be available depending on the part family and condition.

Frequently asked questions about A660-2005-T506/L5R003 :

Is this cable for motor power or for encoder feedback?
It is a pulse coder feedback cable used for encoder signals, not a motor power lead. It sits in the feedback path required by the FANUC servo system to control axis position and speed accurately.

What does "STRAIGHT" mean on this 5 m harness?
It refers to the straight connector orientation and the standard BLACK connector set used on this assembly. In practice, it is the black connector on the A860 pulse coder side and the HIROSE grey connector on the alpha i servo amplifier side, with a 5 meter cable length to match typical cabinet-to-motor routing.

More Information
AvailabilityImmediate shipment
Weight3.00 kgs
Shipping options
Express delivery
  • UPS Next Day AirFind out more
    UPS Next day air service, Get it within 1 business day. (USA)
  • DHL ExpressFind out more
    DHL Worldwide Express - 24/48H delivery to 220 countries with tracking information and signature confirmation..
Standard delivery
  • UPS GroundFind out more
    Standard delivery by UPS Ground (3 to 5 days, depending of your location in the US). Delivered with a proof of Signature. (USA Only)
  • DHL SelectFind out more
    Standard delivery by DHL Select - 48H-72H depending of your country with tracking information. (EUROPE only)
Only registered users can write reviews. Please Sign in or create an account
Need help finding the right product ? Contact us
Back
to top