Enter your destination to get a totals estimate.
A860-2005-T301 Fanuc Pulse coder Alpha 1000iI
Starting at $543.90 $543.90
Buy online your A860-2005-T301 Fanuc Pulse coder Alpha 1000iI reference A860-2005-T301 from our US e-store Cnc-shopping USA, specialist in CNC machine-tools spare parts.
This FANUC pulse coder is an industrial motor feedback encoder used to monitor rotor position and speed on FANUC Alpha series AC servo motors. In the field, a failing pulsecoder typically shows up as servo alarms, unstable positioning, or loss of reference after power cycles, so having the correct replacement unit is critical to bringing a machine back online with the original feedback hardware.
Built for the FANUC Alpha a1000iI (Alpha iI1000) motor family, this encoder is commonly paired with FANUC Alpha i and Alpha iS motor installations found on machine tools and automated equipment. It is a direct-fit pulsecoder intended for service replacement when the original unit is damaged by impact, contamination, or age-related failure.
In a FANUC CNC architecture, the pulsecoder closes the servo loop by providing accurate feedback to the drive and control. When sourcing an encoder for retrofit or repair, matching the exact reference is the safest way to avoid feedback mismatch issues that can lead to persistent alarms or poor axis behavior, especially on legacy installations where configuration changes are not desirable.
Reference: A860-2005-T301
Manufacturer: FANUC
Product type: FANUC pulse coder (motor encoder)
Motor family / series: FANUC Alpha, including Alpha a1000iI (Alpha iI1000)
Typical compatibility: used on FANUC AC Servo Motor models in the Alpha i and Alpha iS ranges (verify the motor model and original encoder reference before ordering)
Country of manufacture: Japan
Use in maintenance: replacement pulsecoder for restoring position feedback after encoder failure, impact damage, or contamination from dust and cutting chips
On the production floor, this pulsecoder is often replaced during corrective maintenance after unexpected downtime, or kept as a stocked spare in rebuild shops supporting older FANUC-driven machines. Using the correct encoder helps restore stable servo feedback and repeatable positioning without forcing changes to the existing motor, cable set, or control configuration.
For maintenance teams working with legacy equipment, having the right FANUC pulse coder in spare inventory can shorten troubleshooting time and avoid extended stoppages while sourcing obsolete parts. This is especially relevant on machines that still run well mechanically but depend on original Alpha-series feedback hardware to stay operational.
Each unit is handled as a precision feedback component and checked on appropriate CNC test benches or simulators by skilled engineers. It is supplied with warranty, and packaged for industrial shipping to limit handling shock and contamination risk. Most products are shipped from our Florida warehouse unless otherwise specified on the product page.
This model is frequently used as an emergency spare part to get a machine running again when an encoder fails without warning. Cnc-shopping USA supports sourcing for obsolete FANUC CNC spare parts, and depending on the case, repair or exchange options may be available to help keep older installations maintainable over the long term.
Frequently asked questions about A860-2005-T301:
What motors is this pulse coder typically used on?
It is associated with the FANUC Alpha a1000iI (Alpha iI1000) motor family and is commonly found on Alpha i and Alpha iS AC servo motor installations. The safest match is always the encoder reference from the existing motor nameplate or original pulsecoder label.
Why does matching the exact FANUC pulse coder reference matter?
FANUC feedback devices are reference-specific, and using the wrong encoder can lead to servo alarms, unstable motion, or the inability to home and hold position correctly. Matching A860-2005-T301 avoids compatibility issues and keeps the original feedback configuration intact.
Is this a good part to keep on the shelf as a spare?
Yes, pulsecoders are common downtime drivers because a single failure can stop an entire axis or spindle from running. Shops supporting legacy FANUC Alpha motor equipment often keep a compatible encoder on hand to reduce repair turnaround time.
| Availability | Immediate shipment |
|---|---|
| Weight | 1.00 kgs |
-
UPS Next Day AirFind out moreUPS Next day air service, Get it within 1 business day. (USA) -
DHL ExpressFind out moreDHL Worldwide Express - 24/48H delivery to 220 countries with tracking information and signature confirmation..
-
UPS GroundFind out moreStandard delivery by UPS Ground (3 to 5 days, depending of your location in the US). Delivered with a proof of Signature. (USA Only) -
DHL SelectFind out moreStandard delivery by DHL Select - 48H-72H depending of your country with tracking information. (EUROPE only)

