Enter your destination to get a totals estimate.
BOSCH SD-B3.031.030-00.000 Motor Encoder 104-911 835
Starting at $1,998.00 $1,998.00
Buy online your BOSCH SD-B3.031.030-00.000 Motor Encoder 104-911 835 reference SD-B3-031-030-00-000 from our US e-store Cnc-shopping USA, specialist in CNC machine-tools spare parts.
This unit is a BOSCH SD series AC servomotor equipped with a HEIDENHAIN ROD 1800 pulses incremental encoder for closed-loop control. It serves as a dependable replacement motor for axis applications on CNC machine-tools that use Bosch SD drive systems. Supplied as a refurbished unit and offered as a practical CNC replacement component for maintenance teams managing legacy and current shop-floor assets.
The motor supports speed up to 3000 rpm and is delivered without brake, which suits axes where a holding brake is not required or is handled elsewhere in the mechanism. The encoder feedback provides stable position and speed information to compatible Bosch SD amplifiers, helping restore machine accuracy after a failure or a planned swap.
Mechanical interface is straightforward in the field. The shaft is a keyed straight 19 mm design for secure coupling, and the flange uses a 95 mm centering diameter for easy alignment during installation. These dimensions match installed bases where the original SD-B3.031.030-00.000 was used, supporting a true drop-in replacement during a downtime event.
Procurement cross references include Lg.-Nr. 104-911 835 and 0 133 514 114, both associated with the same BOSCH configuration. Built in Germany, this model is widely found on mills, lathes and grinding machines that rely on Bosch SD axis control.
Reference: SD-B3-031-030-00-000
Manufacturer: BOSCH
Product family: BOSCH SD-B3 AC servomotor
Main function: Axis motor for CNC feed applications and retrofit replacement
Applications: Field replacement on CNC mills, lathes, grinders and transfer equipment using Bosch SD drives
Key technical data: Keyed straight shaft 19 mm, centering diameter 95 mm, speed up to 3000 rpm, no brake, incremental feedback via HEIDENHAIN ROD 1800 pulses, cross refs Lg.-Nr. 104-911 835 and 0 133 514 114, refurbished and tested with functional warranty, manufactured in Germany
Logistics note: Typically ships within 3 days, depending on availability. Many stocked items ship directly from our Florida facility.
In industrial service, this model is commonly selected as a spare part to recover a down axis or as a planned swap during rebuilds. Matching mechanical dimensions and integrated encoder simplify alignment and wiring checks during a field replacement. Keeping a tested unit on the shelf helps reduce exposure to unplanned stoppages on older machines.
Maintenance teams use this motor as a direct replacement unit when a bearing fault, encoder failure or winding issue is diagnosed on the installed BOSCH SD-B3 assembly. It fits well into spare inventory strategies for shops that still run Bosch SD hardware and want consistent machine uptime while planning future retrofits.
Each refurbished motor is verified by skilled engineers on CNC simulators with servo motors. Encoder signals, run-out behavior and insulation health are checked before dispatch. Units are packed for industrial shipping with shaft and feedback protection. Supplied with a functional warranty. Depending on availability, products are commonly dispatched from our Florida warehouse.
For obsolete part coverage and urgent breakdowns, this model can serve as an emergency spare to get a legacy machine back online. Cnc-shopping USA supports sourcing for hard-to-find BOSCH SD items, and repair or exchange service options may be available for qualifying cores.
Frequently asked questions about SD-B3-031-030-00-000:
Which feedback device is included?
It is equipped with a HEIDENHAIN ROD incremental encoder rated at 1800 pulses, suitable for Bosch SD feedback interfaces used on matching drive modules.
Does this motor have a holding brake?
No. This configuration is supplied without brake, which aligns with original BOSCH SD-B3.031.030-00.000 specifications for axes that do not require a hold function.
What are the key mounting dimensions?
It uses a 19 mm keyed straight shaft and a 95 mm centering diameter. These interfaces support direct fitment where the original motor was installed.
Is it a direct replacement for SD-B3.031.030-00.000?
Yes. It is a drop-in replacement for that code and its procurement references Lg.-Nr. 104-911 835 and 0 133 514 114, subject to verifying your machine’s exact configuration.
What testing is performed before shipping?
Motors are validated on CNC simulators with servo motors. Engineers confirm encoder feedback, rotational behavior and electrical integrity to provide a tested unit ready for installation.
What is the usual dispatch time?
Typical lead time is shipment within 3 days depending on inventory. Many stocked units ship from our Florida warehouse.
| Availability | Shipment within 3 days |
|---|---|
| Weight | 17.00 kgs |
-
UPS Next Day AirFind out moreUPS Next day air service, Get it within 1 business day. (USA) -
DHL ExpressFind out moreDHL Worldwide Express - 24/48H delivery to 220 countries with tracking information and signature confirmation..
-
UPS GroundFind out moreStandard delivery by UPS Ground (3 to 5 days, depending of your location in the US). Delivered with a proof of Signature. (USA Only) -
DHL SelectFind out moreStandard delivery by DHL Select - 48H-72H depending of your country with tracking information. (EUROPE only)

