SESAME MOTOR G13V400S-100 Geared motor Reduction ratio 1:100

Buy online your SESAME MOTOR Geared motor Reduction ratio 1:100 reference G13V400S-100 from our e-store Cnc-shopping, specialist in CNC machine-tools spare parts.

This SESAME MOTOR G13V400S-100 is a compact geared motor designed for low-speed, high-torque auxiliary motion on CNC machines and industrial automation equipment. With a 400 W motor and a 1:100 reduction ratio, it is suitable for conveyors, indexing mechanisms, feeders and other machine peripherals requiring controlled and reliable movement.

The integrated gearbox reduces the motor speed to approximately 14 rpm at 50 Hz and 17 rpm at 60 Hz, providing stable low-speed output for chip conveyors, tool magazine mechanisms, pallet transfer systems and material-handling equipment. Its compact G-series design makes it suitable for replacement applications where the same ratio, mounting and shaft configuration are required.

The motor is available for 220 V or 380 V three-phase operation, with the rated electrical characteristics depending on the supply frequency and voltage. At 220 V, the motor is rated at 2.28 A at 50 Hz and 1.87 A at 60 Hz, while the 380 V ratings are 1.32 A at 50 Hz and 1.09 A at 60 Hz.

Manufactured in Taiwan, the G13V400S-100 is suitable as a CNC replacement component, replacement gearmotor, industrial spare part or emergency spare. It is commonly used for chip conveyors, tool magazine indexing, pallet transfer, feeders and auxiliary machine mechanisms where maintaining the original reduction ratio is important.

Each unit supplied by Cnc-shopping can be inspected and tested on appropriate motor test equipment. Products are securely packaged for industrial transportation and supplied with a commercial warranty, with fast dispatch, worldwide shipping, obsolete-part sourcing, repair and exchange services available depending on stock and condition.

Frequently asked questions about G13V400S-100:

Is this a drop-in replacement for an existing SESAME G-series gearmotor with the same ratio?
When your existing unit shares the same mount pattern, shaft style and 1:100 ratio, this model is typically a direct fit. Always confirm the nameplate code and mechanical interface to maintain alignment and timing.

Can this motor be operated with a VFD for speed adjustment?
It can usually be paired with a suitable VFD when the motor build supports inverter operation. Verify electrical ratings and allowable frequency range to ensure proper cooling and torque at the desired speed.

What output speed should I expect with a 1:100 ratio?
Output speed is the motor’s input speed divided by 100. For example, if the motor runs at 1400 rpm under load, the geared output is about 14 rpm, which is ideal for indexing and steady feed applications.

Does the gear unit require initial lubrication on installation?
Units are typically supplied factory lubricated and sealed. Check the product label or documentation for lubricant type and any scheduled service intervals defined by the manufacturer.

Is this suitable for keeping in spare inventory?
Yes, maintenance teams commonly hold this as a spare part for chip conveyors and indexing mechanisms. Having an identical ratio on hand speeds field replacement and helps restore machine uptime quickly.