SIEMENS 1FT5066-0AG71-2-Z H01 Permanent magnet motor

SIEMENS AC synchronous motor three phase reference 1FT5066-0AG71-2-Z H01 for sale online on Cnc-shopping. The speed of this SIEMENS motor is 4000 rpm. This SIEMENS servo motor includes a tachy reference 1FU1050-6NG (10mVmin) and a HEIDENHAIN encoder reference ROD 320.002 (H01) 1250/U. The torque of this motor is 6.5/8Nm and the current is 8.5/10.4A. This motor has a connector for the tacky and a terminal box (gk 030) for the power connection of the motor. This SIEMENS motor is an AC servomotor to connect to a SIMODRIVE 611 drive converter with a 600V DC link voltage. This SIEMENS 1FT5066-0AG71-2-Z H01 AC servomotor is ready to replace your defective SIEMENS motor reference SIEMENS 1FT5066-0AG71-2-Z H01 on your machine tools and comes with a warranty.

A fuse interrupts excessive current (blows) so that further damage by overheating or fire is prevented. Wiring regulations often define a maximum fuse current rating for particular circuits. Overcurrent protection devices are essential in electrical systems to limit threats to human life and property damage. Fuses are selected to allow passage of normal current plus a marginal percentage and to allow excessive current only for short periods. Slow blow fuses are designed to allow higher currents for a modest amount of time longer, and such considerations are and were commonly necessary when electronics devices or systems had electronic tube tech or a large number of incandescent lights were being powered such as in a large hall, theater or stadium. Tubes and incandescent lights each have reduced current needs as they heat up to operating temperatures for their internal resistance grows as they are heated— the same physics principle causes the fuse material to melt, disconnecting the circuit from power. SIEMENS 1FT5066-0AG71-2-Z H01