SIEMENS 6SL3224-0BE22-2UA0 Sinamics Power Module 240 2.2kW

Buy online your SIEMENS 6SL3224-0BE22-2UA0 Sinamics Power Module 240 from our e-store Cnc-shopping, specialist in CNC machine-tools spare parts.

This SIEMENS SINAMICS G120 POWER MODULE PM240 is a 3-phase power module rated at 2.2 kW, designed for industrial motor drive applications requiring reliable and controlled power conversion. The module operates with a 380–480 V AC supply and integrates a braking chopper, making it suitable for applications where controlled motor deceleration is required.

The 6SL3224-0BE22-2UA0 is designed for cabinet installation and operates as the power stage within a compatible SINAMICS G120 drive system. The module is supplied without a Control Unit and without a BOP, allowing it to be integrated with the appropriate control hardware for the existing installation.

With a high overload capacity of 200% for 3 seconds, 150% for 57 seconds and 100% for 240 seconds, this power module is suitable for demanding industrial applications. It operates with an ambient temperature range of -10°C to +50°C and features an IP20 degree of protection.

This SIEMENS power module is commonly used in CNC machines, conveyors, pumps, fans, machine tools, material-handling systems and industrial automation equipment. It is suitable as a replacement unit, spare part or emergency spare when an existing SINAMICS G120 power stage has failed or requires replacement.

The compact cabinet-mounted design measures approximately 270 × 153 × 165 mm (H × W × D). Before installation, the exact reference, power rating, supply voltage and compatibility with the existing SINAMICS G120 Control Unit and BOP should be verified.

Each unit can be inspected and tested by skilled engineers to verify appropriate power-stage operation and fault behavior. The unit is packaged using protective materials suitable for industrial shipping. A commercial warranty, repair service or exchange service may be available depending on the unit and condition.

Cnc-shopping can provide this SIEMENS 6SL3224-0BE22-2UA0 as a CNC replacement component or industrial spare, with worldwide shipping and fast dispatch depending on availability. We can also assist with sourcing obsolete parts, refurbished units, repair solutions and emergency spares for legacy industrial installations.

Frequently asked questions about 6SL3224-0BE22-2UA0:

Which SINAMICS systems does this unit work with?
It is intended for the SINAMICS S120 platform. Use it with the appropriate SIEMENS Control Unit and DC link components that match this rating and reference.

Is it suitable as a drop-in replacement for a failed 2.2 kW axis stage?
Yes when replacing like-for-like with the same reference. Verify firmware level and transfer parameters through the control hardware tools to restore identical behavior.

What motor types can be driven at this rating?
With the correct control hardware and parameterization, it can supply compatible SIEMENS synchronous servo or standard induction motors within the defined 2.2 kW envelope. Always confirm motor and feedback selection against your S120 documentation.

Any installation notes for cabinet mounting?
Follow SIEMENS guidelines for clearance, cooling airflow and wiring to the DC link and motor output. Maintain proper grounding and EMC practices to ensure stable operation and clean diagnostics.

Do you support refurbished or repair options?
Depending on availability, refurbished unit sourcing, repair service and exchange service may be offered. Contact Cnc-shopping with the reference and application details for current options.